Dual Differential Line Drivers With 3 State Outputs
HD75159
Dual Differential Line Drivers With 3 State Outputs
ADE-205-589 (Z) 1st. Edition Dec. 2000 Description
The HD75...
Description
HD75159
Dual Differential Line Drivers With 3 State Outputs
ADE-205-589 (Z) 1st. Edition Dec. 2000 Description
The HD75159 features dual differential line drivers with three state outputs, which satisfy the requirements of EIA(standard) RS-422A. Each driver has an output control. When the output control is low, the associated outputs are in a high impedance state. This permits many devices to be connected together on the same transmission line for party line applications.
Pin Arrangement
NC 1 1Z 2 1Y 3 1A 4 1B 5 1C 6 GND 7
14 VCC 13 2Z 12 2Y 11 2B 10 2A 9 2C 8 NC
(Top view)
HD75159
Absolute Maximum Ratings
Item Supply Voltage Input Voltage Powre Dissipation (Ta = 25°C) Symbol VCC VIN PT*
1
Rating 7 5.5 DP FP 1150 785 0 to 70 –60 to +150
Unit V V mW °C °C
Operating Temperature Range Storage Temperature Range Note:
Topr Tstg
1. The above date were taken by the ∆V BE method, mounting on a glass epoxy board (40 × 40 × 1.6 mm) of 10 % wiring density. 2. The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time.
Recommended Operating Conditions
Item Supply Voltage Output Current Output Current Operating Temperature Symbol VCC I OH I OL Topr Min 4.75 — — 0 Typ 5.00 — — 70 Max 5.25 –40 40 °C Unit V mA mA
Electrical Characteristics (Ta = 0 to 70°C)
Item Input Voltage Symbol VIH VIL Input Clamp Voltage Output Voltage VIK VOH VOL Output Clamp Voltage Differential Output Voltage VOK VOD1...
Similar Datasheet