Micrel, Inc.
QUAD DIFFERENTIAL AND/NAND
SY10E404
SY1S0YE10400E4404
SY100E404
FEATURES
s Differential D and Q s Extend...
Micrel, Inc.
QUAD DIFFERENTIAL AND/NAND
SY10E404
SY1S0YE10400E4404
SY100E404
FEATURES
s Differential D and Q s Extended 100E VEE range of –4.2V to –5.5V s 700ps max. propagation delay s High frequency outputs s Internal 75KΩ input pull-down resistors s Fully compatible with Motorola 10E/100E404 s Available in 28-pin PLCC package
BLOCK DIAGRAM
D0a D0a D0b D0b
D1a D1a D1b D1b
D2a D2a D2b D2b
D3a D3a D3b D3b
Q0 Q0
Q1 Q1
Q2 Q2
Q3 Q3
DESCRIPTION
The SY10/100E404 are 4-bit differential AND/NAND devices. The differential operation of these devices make them ideal for pulse shaping applications where duty cycle skew is critical. Special design techniques were incorporated to minimize the skew between the upper and lower level gate inputs.
Because a negative 2-input NAND function is equivalent to a 2-input OR function, the differential inputs and outputs of the devices also allow for their use as fully differential 2-input OR/NOR functions.
The output RISE/FALL times of these devices are significantly faster than most other standard ECLinPS devices, resulting in an increased bandwidth.
The differential inputs have clamp structures which will force the Q output of a gate in an open input condition to go to a LOW state. Thus, inputs of unused gates can be left open and will not affect the operation of the rest of the device.
PIN NAMES
Pin D[0:4], D[0:4] Q[0:4], Q[0:4] VCCO
Function Differential Data Inputs Differential Data Outputs VCC to Output
M9999-032206
[email protected] ...