Micrel, Inc.
NOT RECOMMENDED FOR NEW DESIGNS
3.3V 4:1 DIFFERENTIAL MULTIPLEXER
SY100EL57L
SY100EL57L
FEATURES
s 3.3V ...
Micrel, Inc.
NOT RECOMMENDED FOR NEW DESIGNS
3.3V 4:1 DIFFERENTIAL MULTIPLEXER
SY100EL57L
SY100EL57L
FEATURES
s 3.3V power supply s Useful as either 4:1 or 2:1 multiplexer s VBB output for single-ended operation s 75KΩ internal input pulldown resistors s Available in 150 mil 16-pin SOIC package
DESCRIPTION
The SY100EL57L is a full differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can also be used as a differential 2:1 multiplexer with SEL0 input selecting between D0 and D1. The fully differential architecture of the EL57L makes it ideal for use in low skew applications such as clock distribution.
The SEL1 is the most significant select line. The binary number applied to the select inputs will select the same numbered data input (i.e., 00 selects D0).
Multiple VBB outputs are provided for single-ended or AC coupled interfaces. In these scenarios, the VBB output should be connected to the data bar inputs and bypassed via a 0.01µF capacitor to ground. Note that the VBB output can source/sink up to 0.5mA of current without upsetting the voltage level.
TRUTH TABLE
SEL1 L L H H
SEL0 L H L H
DATA OUT D0 D1 D2 D3
PIN NAMES
Pin D0-3 SEL0, 1 VBB1, 2 Q
Function Differential Data Inputs Mux Select Inputs Reference Outputs Data Outputs
M9999-031306
[email protected] or (408) 955-1690
11
Rev.: D Amendment: /0 Issue Date: March 2006
Micrel, Inc.
PACKAGE/ORDERING INFORMATION
Ordering Information(1)
Part Numbe...