Document
UG06A THRU UG06D
MINIATURE ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts
Case Style MPG06
Forward Current - 0.6 Ampere
♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Ideally suited for use in very high frequency switching power supplies, inverters and as a free wheeling diode ♦ Ultrafast reverse recovery times for high efficiency ♦ Soft recovery characteristics ♦ Excellent high temperature switching ♦ Glass passivated junction ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
FEATURES
0.100 (2.54) 0.090 (2.29) DIA
1.0 (25.4) MIN.
0.125 (3.18) 0.115 (2.92)
1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA.
MECHANICAL DATA
Case: Void free molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any WeIght: 0.0064 ounce, 0.181 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
UG06A
UG06B
UG06C
UG06D
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=75°C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=75°C Maximum instantaneous forward voltage at 0.6A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Maximum reverse recovery time
(NOTE 2)
VRRM VRMS VDC I(AV) IFSM VF IR trr TJ=25°C TJ=100°C TJ=25°C TJ=100°C trr Qrr CJ RΘJA RΘJL TJ, TSTG
50 35 50
100 70 100 0.6 40.0 0.95
150 105 150
200 140 200
Volts Volts Volts Amp Amps Volts µA ns ns nC pF °C/W °C
TA=25°C TA=100°C
5.0 100.0 15.0 25.0 35.0 8.0 20.0 9.0 97.0 28.0 -55 to +150
Maximum recovered stored charge
(NOTE 2)
Typical junction capacitance (NOTE 3) Typical thermal resistance (NOTE 4) Operating junction and storage temperature range
NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A,Irr=0.25A (2) trr and Qrr measured at IF=0.6A: VR=30V, di/dt=50A/µs, Irr=10% IRM for meaurement of trr (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Thermal resistance from junction to ambient and junction to lead at 0.375" (9.5mm) lead length P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) copper pads
4/98
RATINGS AND CHARACTERISTIC CURVES UG06A THRU UG06D
FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
0.9
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
0.75
TL, LEAD TEMPERATURE
0.6 0.45 0.3 0.15 0
TA, AMBIENT TEMPERATURE P.C.B. MOUNTED 0.2 x 0.2" (5.0 x 5.0mm) COPPER PADS
PEAK FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH
100
TJ=75°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
10
1
0 25 50 75 100 125.