SM1145C

SM1100C SERIES n n n CMOS COMPATIBLE WITH TRI−STATE OUTPUT SURFACE MOUNT OSCILLATORS IN PLASTIC PACKAGE LAND PATTERN COMPATIBLE TO OUR ENTIRE SM1100X SERIES AND EPSON SG615 STANDARD SPECIFICATIONS: Frequency Range Frequency Stability over Operating Temperature Range Operating Temperature Range Operable Supply Voltage (Vcc) Symmetry (Duty Cycle) (See next page for definition.) Input Current (Icc) & Rise and Fall Time (Tr & Tf) & Jitter Logic “1” & Logic “0” (See next page) Output Load Tri-state Output Packaging (see page R1, Figure 2) 1.000 MHz – 50.000 MHz (Consult factory for specific available frequencies) ± 50 PPM is standard, but ± 25 PPM is also available for certain frequencies. 0 - 70°C is standard, but can be extended to − 40 to +85°C for certain frequencies 1.000 MHz – 30.000 MHz 30.001 MHz – 50.000 MHz SM1100CY SM1100CY SM1100CV 5 Volt ± 10% or 3.3 Volt ± 10% 5 Volt ± 10% only 3.3 Volt ± 10% only 40/60 - 60/40% is standard, but 45/55% symmetry at 50% of Vcc is also available. Depends on frequency and output load. See next page. 90% of Vcc MIN.; 10% of Vcc MAX. 15 pF is standard. Contact factory for heavier loads. Normal output when pin #1 is open (no connection); Normal output when pin #1 is at logic “1”; High-Impedance Output when pin #1 is at logic “0”. 24 mm tape, 330 mm reel: 1000 parts per reel. For quantities <250: 23 parts per tube. PART NUMBERING GUIDE: n The Pletronics part number for an SM1100C series oscillator consists of the following 3 elements: 1. Ov...