MX27C1100

MX27C1100/27C1024 1M-BIT [128K x 8/64K x 16] CMOS EPROM FEATURES 64K x 16 organization(MX27C1024, JEDEC pin out) 128K x 8 or 64K x 16 organization(MX27C1100, ROM pin out compatible) +12.5V programming voltage Fast access time: 55/70/85/100/120/150 ns Totally static operation Completely TTL compatible Operating current: 40mA Standby current: 100uA Package type: - 40 pin plastic DIP - 40 pin plastic SOP - 44 pin PLCC - 40pin 10 x 14mm TSOP(I) GENERAL DESCRIPTION The MX27C1024 is a 5V only, 1M-bit, One Time Programmable Read Only Memory. It is organized as 64K words by 16 bits per word(MX27C1024), 128K x 8 or 64K x 16(MX27C1100), operates from a single + 5 volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. For programming outside from the system, existing EPROM programmers may be used. The MX27C1100/ 1024 supports a intelligent fast programming algorithm which can result in programming time of less than thirty seconds. This EPROM is packaged in industry standard 40 pin dual-in-line packages, 40 lead SOP, 44 lead PLCC, and 40 lead TSOP(I) packages. PIN CONFIGURATIONS PDIP/SOP(MX27C1100) NC A7 A6 A5 A4 A3 A2 A1 A0 CE GND OE Q0 Q8 Q1 Q9 Q2 Q10 Q3 Q11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 A8 A9 A10 A11 A12 A13 A14 A15 NC BYTE/VPP GND Q15/A-1 Q7 Q14 Q6 Q13 Q5 Q12 Q4 VCC BLOCK DIAGR...