C-005R

Crystal unit SMALL CYLINDER LOW/MEDIUM-FREQUENCY CRYSTAL UNIT C-4-TYPE Photolithography finished allows uniform and stable performance. Small and light weight. (ø1.5 x 6mm) Excellent shock resistance and environmental capability. Most suitable for pagers and card products like PCMCIA. Actual size Specifications (characteristics) Item Symbol f TSTG TOPR GL DL TSOL ∆f/f θT a CL Specifications 32.000 kHz to 120.000 kHz 192 kHz -20˚C to +70˚C -10˚C to +60˚C 1.0µW max. 0.1µW typ. Under 280˚C with in 5 sec. ±50ppm,±100ppm 25˚C ±5˚C -0.04ppm/ ˚C2 max. 6pF to ∞ 32 kHz ≤ f < 40 kHz: 40 kHz ≤ f < 60 kHz: 60 kHz ≤ f < 70 kHz: 70 kHz ≤ f ≤ 100 kHz: 100 kHz < f ≤ 120 kHz: 192 kHz: 55 kΩ max. 30 kΩ max. 25 kΩ max. 22 kΩ max. 15 kΩ max. 10 kΩ max. Please specify Do not heat the package at more than 150˚C Ta=25˚C, DL=0.1µW Remarks Please refer to frequency list below Nominal frequency Temperature range Storage temperature Operating temperature Maximum drive level Recommended drive level (characteristics) Soldering condition Frequency tolerance (standard) Peak temperature (frequency) Temperature coefficient (frequency) Load capacitance Series resistance R1 Motional capacitance Shunt capacitance Insulation resistance Aging Shock resistance C1 C0 IR fa S.R. 3.0fF max. 1.5pF max. 500 MΩ min. ±5ppm/year max. ±5ppm max. Ta=25˚C±3˚C, first year Three drops on a hard board from 75 cm or excitation test with 3000G x 0.3ms x 1/2 sine wave x 3 directions Frequency example Type Freq...