Low Pin Count 8-bit Microcontroller
Features
• 80C51 Core Architecture • 256 Bytes of On-chip RAM • 256 Bytes of On-chip XRAM • 16K Bytes of On-chip Flash M...
Description
Features
80C51 Core Architecture 256 Bytes of On-chip RAM 256 Bytes of On-chip XRAM 16K Bytes of On-chip Flash Memory
– Data Retention: 10 Years at 85°C
– Erase/Write Cycle: 100K 2K Bytes of On-chip Flash for Bootloader 2K Bytes of On-chip EEPROM
– Erase/Write Cycle: 100K 14-sources 4-level Interrupts Three 16-bit Timers/Counters Full Duplex UART Compatible 80C51 Maximum Crystal Frequency 40 MHz. In X2 Mode, 20 MHz (CPU Core, 40 MHz) Three or Four Ports: 16 or 20 Digital I/O Lines Two-channel 16-bit PCA
– PWM (8-bit)
– High-speed Output
– Timer and Edge Capture Double Data Pointer 21-bit Watchdog Timer (7 Programmable bits) A 10-bit Resolution Analog-to-Digital Converter (ADC) with 8 Multiplexed Inputs Power-saving Modes
– Idle Mode
– Power-down Mode Power Supply: 3 Volts to 5.5 Volts Temperature Range: Industrial (-40° to +85°C) Packages: SOIC28, SOIC24, PLCC28, VQFP32
Low Pin Count 8-bit Microcontroller with A/D Converter and 16 KBytes Flash Memory
T89C5115 AT89C5115
Rev. 4128G–8051–02/08
Description Block Diagram
The T89C5115 is a high performance Flash version of the 80C51 single chip 8-bit microcontrollers. It contains a 16-KB Flash memory block for program and data.
The 16-KB Flash memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin.
The T89C5115 retains all features of the 80C52 with 256 bytes of in...
Similar Datasheet