MT933

Obsolescence Notice This product is obsolete. This information is available for your convenience only. For more information on Zarlink’s obsolete products and replacement product lists, please visit http://products.zarlink.com/obsolete_products/ MT933 MT933 3.3V 10/100 Fast Ethernet Transceiver to MII DS5029 Issue no 3.0 June 2000 Features Ordering Information G G G G G G G G G G G G G G G G G Integrated 10/100 Mbps Ethernet in a Single Chip Solution Single 3.3V Power Supply Half Duplex and Full Duplex in both 10BASE-T and 100BASE-TX Full MII for a Glueless MAC Connection Extended Register Set Integrated 10BASE-T Transceivers and Receive / Transmit Filters Integrated Adaptive Equaliser and Base Line Wander Correction (for FDDI Killer Packet) Full Auto-Negotiation Support for 10BASE-T and 100BASE-TX both Half and Full Duplex Link Status Change Interrupt Parallel Detection for Supporting Non Auto Negotiation in Legacy Link Partners Low Dynamic Current Deep Sleep Low Power Mode <1mA Internal Power on Reset 64 pin 1mm thick TQFP Package Single Magnetics for 10BASE-T and 100BASE-TX Operation for a Single RJ45 Connector Support for Flow Control 802.3 Specification Integrated 6 LED Driver MT933/CG/TP1N G G G G Low External Component Count Loop-back mode for diagnostics Intelligent power management (auto shutdown, auto wake) Low Transmit Jitter Description The MT933 is a single chip 3.3V CMOS physical layer solution from MII to the magnetics. It is designed for 10BASE-T and ...