Document
MOC301XM, MOC302XM — 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
July 2015
MOC3010M, MOC3011M, MOC3012M, MOC3020M, MOC3021M, MOC3022M, MOC3023M 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
Features
• Excellent IFT Stability—IR Emitting Diode Has Low Degradation
• Peak Blocking Voltage – 250 V, MOC301XM – 400 V, MOC302XM
• Safety and Regulatory Approvals – UL1577, 4,170 VACRMS for 1 Minute – DIN EN/IEC60747-5-5
Applications
• Industrial Controls • Solenoid/Valve Controls • Traffic Lights • Static AC Power Switch • Vending Machines • Incandescent Lamp Dimmers • Solid State Relay • Motor Control • Lamp Ballasts
Description
The MOC301XM and MOC302XM series are optically isolated triac driver devices. These devices contain a GaAs infrared emitting diode and a light activated silicon bilateral switch, which functions like a triac. They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115 VAC operations.
Schematic
Package Outlines
ANODE 1 CATHODE 2
N/C 3
6 MAIN TERM. 5 NC* 4 MAIN TERM.
*DO NOT CONNECT (TRIAC SUBSTRATE)
Figure 1. Schematic
©2005 Fairchild Semiconductor Corporation MOC301XM, MOC302XM Rev. 1.5
Figure 2. Package Outlines
www.fairchildsemi.com
MOC301XM, MOC302XM — 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
Safety and Insulation Ratings
As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits.
Parameter
Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage
Climatic Classification Pollution Degree (DIN VDE 0110/1.89) Comparative Tracking Index
< 150 VRMS < 300 VRMS
Characteristics I–IV I–IV
40/85/21 2
175
Symbol VPR VIORM VIOTM
DTI RIO
Parameter
Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC Maximum Working Insulation Voltage
Highest Allowable Over-Voltage
External Creepage
External Clearance
External Clearance (for Option TV, 0.4" Lead Spacing)
Distance Through Insulation (Insulation Thickness)
Insulation Resistance at TS, VIO = 500 V
Value
1275
1594
850 6000 ≥7 ≥7 ≥ 10 ≥ 0.5 > 109
Unit
Vpeak
Vpeak
Vpeak Vpeak mm mm mm mm
Ω
©2005 Fairchild Semiconductor Corporation MOC301XM, MOC302XM Rev. 1.5
2
www.fairchildsemi.com
MOC301XM, MOC302XM — 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25°C unless otherwise specified.
Symbol
Parameters
Device
Value
Unit
TOTAL DEVICE
TSTG TOPR
TJ
TSOL
Storage Temperature Operating Temperature Junction Temperature Range
Lead Solder Temperature
All
-40 to +150
°C
All
-40 to +85
°C
All
-40 to +100
°C
All
260 for 10 seconds
°C
Total Device Power Dissipation at 25°C Ambient PD Derate Above 25°C
All
330 mW 4.4 mW/°C
EMITTER
IF Continuous Forward Current VR Reverse Voltage
Total Power Dissipation at 25°C Ambient PD Derate Above 25°C
All 60 mA All 3 V
100 mW All
1.33 mW/°C
DETECTOR
VDRM Off-State Output Terminal Voltage
MOC3010M MOC3011M MOC3012M
MOC3020M MOC3021M MOC3022M MOC3023M
250
V 400
ITSM
Peak Repetitive Surge Current (PW = 100 μs, 120 pps)
All 1 A
Total Power Dissipation at 25°C Ambient PD Derate Above 25°C
300 mW All
4 mW/°C
©2005 Fairchild Semiconductor Corporation MOC301XM, MOC302XM Rev. 1.5
3
www.fairchildsemi.com
MOC301XM, MOC302XM — 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
Electrical Characteristics
TA = 25°C unless otherwise specified.
Individual Component Characteristics
Symbol
Parameters
Test Conditions
EMITTER
VF Input Forward Voltage IR Reverse Leakage Current DETECTOR
IDRM
Peak Blocking Current, Either Direction
VTM
Peak On-State Voltage, Either Direction
IF = 10 mA VR = 3 V, TA = 25°C
Rated VDRM, IF = 0(1) ITM = 100 mA peak, IF = 0
Device Min. Typ. Max. Unit
All
1.15 1.50
V
All
0.01 100
μA
All 10 100 nA
All
1.8 3.0
V
Transfer Characteristics Symbol DC Characteristics
IFT LED Trigger Current
IH
Holding Current, Either Direction
Test Conditions Voltage = 3 V(2)
Device MOC3020M MOC3010M MOC3021M MOC3011M MOC3022M MOC3012M MOC3023M
All
Min.
Typ. Max. Unit 30
15
mA 10
5 100
μA
Isolation .