MP60-F

KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE October 27, 1997 MP60-F TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION: The MP60 series of power modules are economical 49W (nominal) switching DC:DC converters with an integral connector designed to Intel Corporation’s Voltage Regulator Module specification for the Klamath Processor. The module has additional monitoring functions for Power Good Signal, Output Enable and Upgrade Present. The output voltage can be set between 1.8V and 3.5V by means of a five bit voltage identification code, to support current and future versions of the Pentium® Pro, Klamath and OverDrive® processor variants. To power Pentium® Pro processors (VRM 8.0) use MP60-E. FEATURES: Integral 40-pin header connector Programmable output voltage to suit processor (by VID code); adjustable from 1.8 to 3.5V Maximum output current 14A Efficiency >80% at full load Designed to specifications for Intel Klamath Processor voltage regulator module Fast transient response APPLICATIONS: Intel Klamath Power Supply ORDERING INFORMATION: DEVICE MP60-F VOUT (volts) Programmable ELECTRICAL CHARACTERISTICS Conditions: VO = 3.1V, VIN = 4.75 - 5.25V, IO = 10A, unless otherwise stated. PARAMETER Output Voltage Output Current Current Surge Limit Output Over Voltage Protection Output Slew Rate Quiescent Current Temperature Coefficient Temperature Stability Operating Efficiency (full load) Switching Frequency DC Output Ripple Voltage Operati...