Smartcard MCU With 512 Bytes EEPROM
®
ST16600
Smartcard MCU With 512 Bytes EEPROM
DATA BRIEFING
s s
8 BIT ARCHITECTURE CPU 6 KBytes of USER ROM SECTOR CO...
Description
®
ST16600
Smartcard MCU With 512 Bytes EEPROM
DATA BRIEFING
s s
8 BIT ARCHITECTURE CPU 6 KBytes of USER ROM SECTOR COMBINATIVE 1 KByte of SYSTEM ROM 128 Bytes of RAM 512 Bytes of EEPROM, SECTOR COMBINATIVE – Highly reliable CMOS EEPROM technology – 10 year data retention – 300,000 Erase/Write cycle endurance – Protected One Time Programmable block (32 or 64 bytes) – 1 to 16 bytes block either Erase or Write in single cycle programming
Micromodule (D3)
2 2 2 2
s s s
s
EXTENDED VOLTAGE OPERATION – VCC Range: 2.7V to 5.5V SERIAL ACCESS, ISO 7816-3 COMPATIBLE POWER SAVING STANDBY MODE UP TO 5 MHz INTERNAL OPERATING FREQUENCY VERY HIGH SECURITY FEATURES INCLUDING EEPROM FLASH ERASE CONTACT ASSIGNMENT COMPATIBLE ISO 7816-2 ESD PROTECTION GREATER THAN 5000V 2 OPERATING CONFIGURATIONS – ISSUER – USER
Wafer
s s s
s
s
s s
BD.600/9809V1
This is Brief Data from STMicroelectronics. Details are subject to change without notice. For complete data, please contact your nearest Sales Office or SmartCard Products Divison, Rousset, France. Fax: (+33) 4 42 25 87 29
1/2
ST16600
DESCRIPTION The ST16600, a member of the standard ST16 device family, is a serial access microcontroller especially designed for high volume and cost competitive Smartcard applications where firmware security algorithm must be implemented. The ST16600 is based on 8 bit CPU core and includes on chip memories: 128 Bytes of RAM, 6 KBytes of USER ROM, 1 KByte of SYSTEM ROM, and 512 Bytes of EEPROM. Both ROM and EEP...
Similar Datasheet