Quad EIA-422-A Line Receiver
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MC26C32/D
MC26C32
Product Preview Quad EIA-422-A Line R...
Description
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MC26C32/D
MC26C32
Product Preview Quad EIA-422-A Line Receiver
CMOS
16
P SUFFIX PLASTIC DIP CASE 648
1
The MC26C32 is a quad differential line receiver designed for digital data transmission over balanced lines. The MC26C32 meets all the requirements of standard EIA–422–A while retaining the low–power characteristics of CMOS. The MC26C32 has an input sensitivity of 200 mV over the common mode input voltage range of ± 7 V. In addition, each receiver chain has internal hysteresis circuitry to improve noise margin and discourage output instability for slowly changing input waveforms. The MC26C32 is pin compatible with the AM26LS32. All pins are protected against damage due to electrostatic discharges. Typical Power Supply Current: 6 mA 2000 V ESD Protection on the Inputs and Outputs Typical Propagation Delay: 18 ns Typical Input Hysteresis: 75 mV Meets the Requirements of Standard EIA–422–A Operation from Single 5 V Supply High Impedance Mode for Outputs Connected to System Buses TTL/CMOS Compatible Outputs
16 1
D SUFFIX SOG PACKAGE CASE 751B
ORDERING INFORMATION
MC26C32P MC26C32D Plastic DIP SOG Package
BLOCK DIAGRAM
INPUT INPUT D2 D1 10 + – 9 INPUT INPUT C1 C2 6 + – 7 INPUT INPUT B1 B2 14 + – 15 INPUT INPUT A1 A2 2 + – 1
ENB 12
ENB 4
8 GND
16 VCC
11 OUTPUT D
5 OUTPUT C
13 OUTPUT B
3 OUTPUT A
This document contains information on a product under development. Motorola reserves the rig...
Similar Datasheet