M38510-101J

INCH-POUND MIL-M-38510/101J 07 February 2003 SUPERSEDING MIL-M-38510/101H 30 October 2001 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON This specification is approved for use by all Departments and Agencies of the Department of Defense. Inactive for new design after 13 July 1995. 1. SCOPE 1.1 Scope. This specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3). 1.2 Part number. The complete part number shall be in accordance with MIL-PRF-38535, and as specified herein.. 1.2.1 Device types. The device types shall be as shown in the following: Device type 01 02 03 04 05 06 07 08 Circuit Single operational amplifier - internally compensated Dual operational amplifier - internally compensated Single operational amplifier - externally compensated Single operational amplifier - externally compensated Dual operational amplifier - externally compensated 1/ Dual operational amplifier - externally compensated 1/ Single operational amplifier, high speed Dual operational amplifier - internally compensated 1.2.2 Device class. The device class shall be the product assurance level as defined in MIL-PRF-38535. ______ 1/ Device types 05 and 06 may be monolithic, or ...