Order this document by MC3488A/D
Dual EIA-423/EIA-232D Line Driver
The MC3488A dual is single–ended line driver has bee...
Order this document by MC3488A/D
Dual EIA-423/EIA-232D Line Driver
The MC3488A dual is single–ended line driver has been designed to satisfy the requirements of EIA standards EIA–423 and EIA–232D, as well as CCITT X.26, X.28 and Federal Standard FIDS1030. It is suitable for use where signal wave shaping is desired and the output load resistance is greater than 450 ohms. Output slew rates are adjustable from 1.0 µs to 100 µs by a single external resistor. Output level and slew rate are insensitive to power supply variations. Input undershoot diodes limit transients below ground and output current limiting is provided in both output states. The MC3488A has a standard 1.5 V input logic threshold for TTL or NMOS compatibility.
PNP Buffered Inputs to Minimize Input Loading
MC3488A
DUAL EIA–423/EIA–232D DRIVER
SEMICONDUCTOR TECHNICAL DATA
Short Circuit Protection Adjustable Slew Rate Limiting MC3488A Equivalent to 9636A Output Levels and Slew Rates are Insensitive to Power Supply Voltages No External Blocking Diode Required for VEE Supply Second Source µA9636A
D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8)
P1 SUFFIX PLASTIC PACKAGE CASE 626
PIN CONNECTIONS
Wave 1 Shape Input A 2 Input B 3 Gnd 4 8 7 6 5 VCC Output A Output B VEE
ORDERING INFORMATION
Device MC3488AP1 MC3488AD Operating Temperature Range TA = 0 to +70°C Package Plastic DIP SO–8
Simplified Application
Wave Shape Control MC3488A Driver RS–423 Interface MC3486 Three–State Receiver
TTL Logic
© Motorola,...