Four-Port Longitudinal Two-Chip Protector
Four-port Longitudinal Two-chip Protector
Four-port Longitudinal Two-chip Protector
This hybrid Single In-line Package ...
Description
Four-port Longitudinal Two-chip Protector
Four-port Longitudinal Two-chip Protector
This hybrid Single In-line Package (SIP) protects four twisted pairs from overcurrent and overvoltage conditions. Comprised of eight discrete DO-214AA SIDACtor devices and eight TeleLink surface mount fuses, it is ideal for densely populated line cards that cannot afford PCB inefficiencies or the use of series power resistors. Surge current ratings up to 500 A are available.
F2 Tip
2 5
F4 Tip
7 10
F6 Tip
12 15
F8 Tip
17 20
Z2 Gnd
3
Z4 Gnd
8
Z6 Gnd
13
Z8 Gnd
18
Z1 Ring
4 1
Z3 Ring
9 6
Z5 Ring
14 11
Z7 Ring
19 16
F1
F3
F5
F7
Electrical Parameters
VDRM Volts Part Number * P0602Z_ P1402Z_ P1602Z_ P2202Z_ P2702Z_ P3002Z_ P3602Z_ P4202Z_ P4802Z_ P6002Z_ VS Volts VDRM Volts VS Volts VT Volts 4 4 4 4 4 4 4 4 4 4 IDRM µAmps 5 5 5 5 5 5 5 5 5 5 IS mAmps 800 800 800 800 800 800 800 800 800 800 IT Amps 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 IH mAmps 50 150 150 150 150 150 150 150 150 150 CO pF Pins 2-3, 3-4 110 50 50 40 40 40 40 30 30 30
Pins 2-3, 4-3, 7-8, 9-8, 12-13, 14-13, 17-18, 19-18 25 58 65 90 120 140 160 190 220 275 40 77 95 130 160 180 220 250 300 350
Pins 2-4, 7-9, 12-14, 17-19 50 116 130 180 240 280 320 380 440 550 80 154 190 260 320 360 440 500 600 700
* For individual “ZA,” “ZB,” and “ZC” surge ratings, see table below. General Notes: All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. IPP is a repetiti...
Similar Datasheet