DatasheetsPDF.com

MP1010 Dataheets PDF



Part Number MP1010
Manufacturers Microsemi
Logo Microsemi
Description 10 Amp Single Phase Bridge Rectifier 50 to 1000 Volts
Datasheet MP1010 DatasheetMP1010 Datasheet (PDF)

9261 Owensmouth Ave. Chatsworth, Ca 91311 Phone: (818) 701-4933 Fax: (818) 701-4939 MP1005 THRU MP1010 10 Amp Single Phase Bridge Rectifier 50 to 1000 Volts PB-6 B • • • • Features Low Forward Voltage Drop Plastic Case With Internal Metal Heat Sink Any Mounting Position Surge Rating Of 150 Amps • • Maximum Ratings Operating Temperature: -65 °C to +125°C Storage Temperature: -65°C to +150°C Device Marking Maximum Reccurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000v Maximum RMS.

  MP1010   MP1010



Document
9261 Owensmouth Ave. Chatsworth, Ca 91311 Phone: (818) 701-4933 Fax: (818) 701-4939 MP1005 THRU MP1010 10 Amp Single Phase Bridge Rectifier 50 to 1000 Volts PB-6 B • • • • Features Low Forward Voltage Drop Plastic Case With Internal Metal Heat Sink Any Mounting Position Surge Rating Of 150 Amps • • Maximum Ratings Operating Temperature: -65 °C to +125°C Storage Temperature: -65°C to +150°C Device Marking Maximum Reccurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000v Maximum RMS Voltage Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000v Microsemi Catalog Number C MP1005 MP101 MP102 MP104 MP106 MP108 MP1010 MP1005 MP101 MP102 MP104 MP106 MP108 MP1010 35V 70V 140V 280V 420V 560V 700V E D G + AC A AC - Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Forward Voltage Drop Per Element IF(AV) IFSM 10.0A 150A TJ = 75°C 8.3ms, half sine A VF 1.1V IFM = 5.0A per element; TA = 25°C* DIM A B C D E G DIMENSIONS INCHES MIN .580 .230 --.405 .038 .145 MM MIN 14.70 5.8 --10.30 .97 3.70 Maximum DC Reverse Current At IR 10µA TA = 25°C Rated DC Blocking 2.0mA TA = 100°C Voltage *Pulse test: Pulse width 300 µsec, Duty cycle 1% MAX .620 .270 .750 .444 .042 --- MAX 15.70 6.9 19.20 11.30 1.10 --- NOTE 2PL 2PL 4PL/TYP ∅ Santa Ana: (714) 979-8220 Scottsdale: (602) 941-6300 Sertech Labs: (617) 924-9280 Ireland: (353) 65-40044 Colorado: (303) 469-2161 Bombay: (91) 22-832-002 Watertown: (617) 926-0404 Hong Kong: (852) 2692-1202 Chatsworth: (818) 701-4933 MP1005 thru MP1010 Figure 1 Typical Forward Characteristics 100 60 40 20 10 6 4 2 25°C Amps 1 .6 .4 .2 .1 .06 .04 .02 .01 .2 .4 .6 .8 1.0 1.2 1.4 Volts Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Forward Derating Curve 12 Instantaneous Reverse Leakage Current - MicroAmperes versus Percent Of Rated Peak Reverse Voltage - Volts 10 6 4 2 1 .6 .4 .2 TJ=25°C µ Amps .1 .06 .04 .02 .01 .006 .00 4 .002 .001 20 40 60 80 100 120 140 Figure 2 Typical Reverse Characteristics Figure 4 Peak Forward Surge Current 150 10 125 100 75 Amps 50 25 8 6 Amps 4 2 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 0 25 50 75 °C Average Forward Rectified Current - Amperes versus Ambient Temperature - °C (602) 941-6300 Santa Ana: (714) 979-8220 Scottsdale: Sertech Labs: (617) 924-9280 Ireland: (353) 65-40044 Colorado: (303) 469-2161 Bombay: (91) 22-832-002 0 1 2 4 6 8 10 Cycles 20 40 00 60 80 100 100 150 175 Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Watertown: (617) 926-0404 Hong Kong: (852) 2692-1202 Chatsworth: (818) 701-4933 .


TA2092N MP1010 MP1010


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)