Wide-Bandwidth DIFFERENTIAL 2 x 1 MULTIPLEXER
®
MP
C10
2
MPC102
MPC
102
Wide-Bandwidth DIFFERENTIAL 2 x 1 MULTIPLEXER
FEATURES
q BANDWIDTH: 210MHz (1.4Vp-p) q ...
Description
®
MP
C10
2
MPC102
MPC
102
Wide-Bandwidth DIFFERENTIAL 2 x 1 MULTIPLEXER
FEATURES
q BANDWIDTH: 210MHz (1.4Vp-p) q LOW INTERCHANNEL CROSSTALK: –68dB (30MHz, SO); –58dB (30MHz, DIP) q LOW SWITCHING TRANSIENTS: +6mV/–8mV q LOW DIFFERENTIAL GAIN/PHASE ERRORS: 0.02%, 0.02° q LOW QUIESCENT CURRENT: One Channel Selected: ±4.6mA No Channel Selected: ±250µA The MPC102 consists of four identical monolithic, integrated, open-loop buffer amplifiers. Two buffer outputs are each connected internally at the output. The bipolar complementary buffers form a unidirectional transmission path and offer extremely high output-to-input isolation. The MPC102 multiplexer enables the user to connect one of two input signals to the corresponding output. The output of the multiplexer is in a high-impedance state when no channel is selected. When one channel is selected with a digital “1” at the corresponding SEL input, the component acts as a buffer with high input impedance and low output impedance. The wide bandwidth of over 210MHz at 1.4Vp-p signal level, high linearity and low distortion, and low input voltage noise of 4nV/√Hz make this crosspoint switch suitable for RF and video applications. All performance is specified with ±5V supply voltage, which reduces power consumption in comparison with ±15V designs. The multiplexer is available in a spacesaving SO-14 and DIP packages. Both are designed and specified for operation over the industrial temperature range (–40°C to +85°C.)
IN1 IN2 IN3 IN...
Similar Datasheet