Document
®
SP200/204/205/206/207/208/211/213
+5V High–Speed RS-232 Transceivers with 0.1µF Capacitors
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 0.1µF External Charge Pump Capacitors 120kbps Data Rate Standard SOIC and SSOP Packages Multiple Drivers and Receivers Single 5V Supply Operation 1µA Shutdown Mode WakeUp Feature in Shutdown Mode Tri–State Receiver Outputs Meets All RS-232 and V.28 Specifications Improved Driver Output Capacity for Mouse Applications ■ ±10kV ESD Protection*
DESCRIPTION… The SP200 Series are multi–channel RS-232 line transceivers in a variety of configurations to fit most communication needs. All models in this Series feature low–power CMOS construction and Sipex patented (5,306,954) on-board charge pump circuitry to generate the ±10V RS-232 voltage levels, using 0.1µF charge pump capacitors to save board space and reduce circuit cost. The SP200, SP205, SP206, SP207B, SP211 and SP213 models feature a low–power shutdown mode, which reduces power supply drain to 1µA. A WakeUp function keeps the receivers active in the shutdown mode.
Number of RS-232 Model Drivers Receivers SP200 5 0 SP204 4 0 SP205 5 5 SP205B 5 5 SP206 4 3 SP206B 4 3 SP207 5 3 SP207B 5 3 SP208 4 4 SP211 4 5 SP211B 4 5 SP213 4 5 No. of Receivers No. of External Active in Shutdown 0.1µF Capacitors 0 4 0 4 0 None 5 None 0 4 3 4 0 4 3 4 0 4 0 4 5 4 2 4 Shutdown WakeUp TTL Tri–State Yes No No No No No Yes No Yes Yes Yes Yes Yes No Yes Yes Yes Yes No No No Yes Yes Yes No No No Yes No Yes Yes Yes Yes Yes Yes Yes
Table 1. Model Selection Table *All driver outputs and receiver inputs characterized per MIL-STD-883C Method 3015.7
REV: A DATE:12/03/2003
+5V High-Speed RS232 Transceivers
© Copyright 2000 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. VCC ............................................................................................ +6V V+ ................................................................. (VCC – 0.3V) to +13.2V V– ........................................................................................... 13.2V Input Voltages TIN ................................................................... –0.3V to (VCC +0.3V) RIN ........................................................................................... ±20V Output Voltages TOUT .......................................................... (V+, +0.3V) to (V–, –0.3V) ROUT ................................................................. –0.3V to (VCC +0.3V) Short Circuit Duration on TOUT ....................................... Continuous Power Dissipation Plastic DIP .......................................................................... 375mW (derate 7mW/°C above +70°C) Small Outline ...................................................................... 375mW (derate 7mW/°C above +70°C)
SPECIFICATIONS
VCC at nominal ratings; 0.1µF charge pump capacitors; TMIN to TMAX, unless otherwise noted.
PARAMETER TTL INPUTS Logic Threshold VIL VIH Logic Pullup Current Maximum Data Rate TTL OUTPUTS Compatibility VOL VOH Leakage Current RS-232 OUTPUT Output Voltage Swing
MIN.
TYP.
MAX.
UNIT
CONDITIONS TIN, EN, SD
0.8 2.0 15 120 TTL/CMOS 0.4 3.5 0.05 ±10 200
Volts Volts µA kbps
TIN = 0V CL = 2,500pF, RL = 3kΩ
Volts Volts µA
IOUT = 3.2mA; VCC = +5V IOUT = –1.0mA
EN = VCC; 0V ≤ VOUT ≤ VCC ; TA = +25°C
±5
±7 ±25 +15 1.2 1.7 0.5 5 1.5 30 5 400 250 2.4 1.0 7
Volts Ohms mA Volts Volts Volts Volts kΩ µs V/µs V/µs ns ns
Output Resistance 300 Output Short Circuit Current RS-232 INPUT Voltage Range –15 Voltage Threshold LOW 0.8 HIGH Hysteresis 0.2 Resistance 3 DYNAMIC CHARACTERISTICS Propagation Delay Instantaneous Slew Rate Transition Region Slew Rate Output Enable Time Output Disable Time
All transmitter outputs loaded with 3kΩ to ground VCC = 0V; VOUT = ±2V Infinite duration
VCC = 5V, TA = +25°C VCC = 5V, TA = +25°C VCC = +5V ±15V; TA = +25°C RS-232–to–TTL CL = 50pF, RL = 3–7kΩ; TA = +25°C CL = 2,500pF, RL = 3kΩ; measured from +3V to –3V or –3V to +3V
REV: A DATE:12/03/2003
+5V High-Speed RS232 Transceivers
© Copyright 2000 Sipex Corporation
2
SPECIFICATIONS
VCC at nominal ratings; 0.1µF charge pump capacitors; TMIN to TMAX, unless otherwise noted.
PARAMETER MIN. POWER REQUIREMENTS VCC SP200, SP205, SP207 and SP207B 4.75 All other parts 4.50 ICC
TYP.
MAX.
UNIT
CONDITIONS
5.00 5.00 4 20 1
5.25 5.50 10
Volts Volts mA mA µA TA = +25°C No load; VCC = ±10% All transmitters RL = 3kΩ TA = +25°C
Shutdown Current 10 ENVIRONMENTAL AND MECHANICAL Operating Temperature Commercial, –C 0 +70 Extended, –E –40 +85 Storage Temperature –65 +125 Package –A Shrink (SSOP) small outline –T Wide (SOIC) small outline
°C °C °C
Transmitter Output RL=3kΩ, CL=5,000pF
Transmitter Output RL=3kΩ, CL=2,500pF
R.