8-bit register comparator
INTEGRATED CIRCUITS
74F524 8-bit register comparator (open-collector + 3-State)
Product specification IC15 Data Handboo...
Description
INTEGRATED CIRCUITS
74F524 8-bit register comparator (open-collector + 3-State)
Product specification IC15 Data Handbook 1990 Aug 07
Philips Semiconductors
Philips Semiconductors
Product specification
8-bit register comparator (open collector + 3-State)
74F524
FEATURES
8-Bit bidirectional register with bus-oriented input-output Independent serial input-output to register Register bus comparator with ‘equal to’, ‘greater than’ and
‘less than’ outputs
PIN CONFIGURATION
S0 I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 1 2 3 4 5 6 7 8 9 10 20 VCC 19 S1 18 SE 17 C/SI 16 C/SO 15 EQ 14 GT 13 LT 12 M 11 CP
Cascadable in groups of 8-bits Open collector comparator outputs for AND-wired expansion Two’s complement or magnitude compare
DESCRIPTION
The 74F524 is an 8-bit bidirectional register with parallel input and output, plus serial input and output progressing from MSB to LSB. All data inputs, serial and parallel, are loaded by the rising edge of the clock. The device functions are controlled by two control lines (S0, S1) to execute shift, load, hold and read out. An 8-bit comparator examines the data stored in the registers and on the data bus. Three true-High, open collector outputs representing ‘register equal to bus’, ‘register greater than bus’ and ‘register less than bus’ are provided. These outputs can be disabled to the OFF state by the use of Status Enable (SE). A mode control has also been provided to allow Two’s Complement as well as magnitude compare. Linking in...
Similar Datasheet