74F257A

INTEGRATED CIRCUITS 74F257A Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State) Product specification IC15 Data Handbook 1995 Mar 31 Philips Semiconductors Philips Semiconductors Product specification Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State) 74F257A FEATURES Industrial range available (–40°C to +85°C) Multifunction capability Non-inverting data path 3-State outputs See 74F258A for inverting version DESCRIPTION The 74F257A has four identical 2-input multiplexers with 3-State outputs which select 4 bits of data from two sources uncer control of a common Select (S) input. The I0a inputs are selected when the common Select input is Low and the I1n inputs are selected when the common Select input is High. Data appears at the outputs in true non-inverted form from the selected inputs. The 74F257A is the logic implementation of a 4-pole, 2-position switch where the position of the switch is determined by the logic levels supplied to the common Slect input. Outputs are forced to a high impedance “off” state when the Output Enable (OE) is High. All but one device must be in high impedance state to avoid currents that would exceed the maximum rating if the outputs were tied together. Design of the Output Enable signals must ensure that there is no overlap when outputs of 3-state devices were tied together. PIN CONFIGURATION S I0a I1a Ya I0b I1b Yb GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE I0d I1d Yd I0c I1c Yc SF006...