DatasheetsPDF.com

SF2G Dataheets PDF



Part Number SF2G
Manufacturers GOOD-ARK Electronics
Logo GOOD-ARK Electronics
Description GLASS PASSIVATED SUPER FAST RECTIFIER
Datasheet SF2G DatasheetSF2G Datasheet (PDF)

SF1G THRU SF7G GLASS PASSIVATED SUPER FAST RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Superfast recovery times Low forward voltage, high current capability Hermetically sealed Low leakage High surge capability Plastic package has Underwriters Laboratories Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound Mechanical Data Case: Molded plastic, A-405 Terminals: Axial leads, solderable to MIL-STD-202, method 208 Polarity: Col.

  SF2G   SF2G



Document
SF1G THRU SF7G GLASS PASSIVATED SUPER FAST RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Superfast recovery times Low forward voltage, high current capability Hermetically sealed Low leakage High surge capability Plastic package has Underwriters Laboratories Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound Mechanical Data Case: Molded plastic, A-405 Terminals: Axial leads, solderable to MIL-STD-202, method 208 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.008 ounce, 0.235 gram DIM ENSIONS DIM A B C D inches Min. 0.165 0.079 0.020 1.000 Max. 0.205 0.106 0.024 Min. 4.2 2.0 0.5 25.40 mm Max. 5.2 2.7 0.6 Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. Symbols SF1G SF2G SF3G SF4G SF5G SF6G SF7G Units Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward current 0.375" (9.5mm) lead length at TA=55 Peak forward surge current, IFM (surge): 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum forward voltage at 1.0 ADC Maximum DC reverse current at rated DC blocking voltage Maximum DC reverse current at rated DC blocking voltage TA=125 Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating and storage temperature range VRRM VRMS VDC I(AV) IFSM VF IR IR Trr CJ R JA 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30.0 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amp Amps 0.95 1.27 5.0 400.0 35.0 22.0 50.0 -55 to +150 1.75 Volts A A nS F /W TJ, TSTG Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to ambient and from junction to lead length 0.375” (9.5mm) P.C.B. mounted 1 RATINGS AND CHARACTERISTIC CURVES 2 .


SF29 SF2G SF3


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)