INTEGRATED CIRCUITS
SA910 Variable gain RF predriver amplifier
Product specification 1997 Aug 12
Philips Semiconductor...
INTEGRATED CIRCUITS
SA910 Variable gain RF predriver amplifier
Product specification 1997 Aug 12
Philips Semiconductors
Philips Semiconductors
Product specification
Variable gain RF predriver amplifier
SA910
DESCRIPTION
The SA910 is a variable gain predriver amplifier designed for handheld analog cellular telephones. When used with a UHF power
transistor, it forms a cost-effective, low-profile, surface mount power amplifier solution (1.2W maximum PAE > 50%). The SA910 integrates power detection and control circuitry that is stabilized over temperature and voltage. In power down mode, the SA910 draws less than 10µA of current. The SA910 is fabricated using Philips QUBiC BiCMOS process.
PIN CONFIGURATION
VCC1 VREF GND RFIN GND GND 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 PSENSE BIASOUT GND RFOUT1 GND GND RFOUT2 GND PWRUP OFFSET
FEATURES
MMIC BiCMOS predriver amplifier Low voltage 2.7 to 5.5V single supply operation 820 to 905MHz bandwidth High power gain >20dB High power output >23dBm (typical) @ 3V Efficiency = 35% (typical) Wide gain control range: >32dB Few external components required Integrated power detector and comparison gain control circuitry 50Ω input, open-collector output SSOP-20 package Integrated
regulator with offset adjustment for biasing an external
output stage
OUTLPF GND VC VCC BIAS
SR01067
APPLICATIONS
900MHz analog cellular Handheld transmitting equipment in the 820 to 905MHz frequency
range
Cordless ph...