1GHz low voltage LNA and mixer
INTEGRATED CIRCUITS
SA611 1GHz low voltage LNA and mixer
Product specification Supersedes data of 1997 Nov 07 IC17 Data...
Description
INTEGRATED CIRCUITS
SA611 1GHz low voltage LNA and mixer
Product specification Supersedes data of 1997 Nov 07 IC17 Data Handbook 1999 Mar 26
Philips Semiconductors
Philips Semiconductors
Product specification
1GHz low voltage LNA and mixer
SA611
DESCRIPTION
The SA611 is a combined low-noise amplifier, and mixer designed for high-performance low-power communication systems from 800-1000MHz. The low-noise preamplifier has a 1.7dB noise figure at 881MHz with 15dB gain and an IP3 intercept of -7dBm at the input. The gain is stabilized by on-chip compensation to vary less than ±0.2dB over -40 to +85°C temperature range. The wide-dynamic-range mixer has a 12dB noise figure and IP3 of +7.0dBm at the input at 881MHz. The nominal current drawn from a single 3V supply is 8.3mA. Additionally, the entire circuit can be powered down to further reduce the supply current to less than 20µA.
PIN CONFIGURATION
PD1 PD2 GND LO OUT GND GND GND GND GND 1 2 3 4 5 6 7 8 9 20 MIXER OUT 19 MIXER OUT 18 GND 17 MIXER IN 16 GND 15 LNA IN 14 GND 13 LNA OUT 12 VCC 11 GND
FEATURES
Low current consumption Outstanding gain and noise figure Excellent gain stability versus temperature and supply voltage LNA and mixer power down capability
GND 10
SR00124
Figure 1. Pin Configuration
APPLICATIONS
900MHz cellular and cordless front-end Spread spectrum receivers RF data links UHF frequency conversion Portable radio
ORDERING INFORMATION
DESCRIPTION 20-Pin Shrink Small Outline Package ...
Similar Datasheet