Transient Voltage Suppressors
SA5V0(C)A - SA170(C)A
Transient Voltage Suppressors SA5V0(C)A - SA170(C)A
Features
• Glass passivated junction. • 500W...
Description
SA5V0(C)A - SA170(C)A
Transient Voltage Suppressors SA5V0(C)A - SA170(C)A
Features
Glass passivated junction. 500W Peak Pulse Power capability on
10/1000 µs waveform.
Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less
than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional.
Typical IR less than 1.0 µA above 10V.
DO-15
COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES.
DEVICES FOR BIPOLAR APPLICATIONS
- Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions.
500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
Symbol
Parameter
Value
PPPM IPPM PD
IFSM
Tstg TJ
Peak Pulse Power Dissipation on 10/1000 µs waveform
Peak Pulse Current on 10/1000 µs waveform
Power Dissipation .375 " lead length @ TA = 75°C
Non-repetitive Peak Forward Surge Current superimposed on rated load (JEDEC method)
Storage Temperature Range
(Note 1)
Operating Junction Temperature
500 see table
1.0
70 -65 to +175
+ 175
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
Units
W A
W
A °C °C
2002 Fairchild Semiconductor Corporation
SA5V0(C)A - SA170(C)A, Rev. D
SA5V0(C)A - SA170(C)A
Transient Voltage Suppressor...
Similar Datasheet