NCN6010

NCN6010 MPU or GSM Controller C8 C4 I/O CLK Vpp RST GND VCC DET DET SIM Card Supply and Level Shifter The NCN6010 is a level shifter analog circuit designed to translate the voltages between a SIM Card and an external microcontroller. A built-in DC-DC converter makes the NCN6010 useable to drive any type of SIM card. The device fulfills the GSM 11.11 specification. The external MPU has an access to a dedicated input STOP pin, providing a way to switch off the power applied to the SIM card in case of failure or when the card is removed. Features ăSupports 3.0 V or 5.0 V Operating SIM Card ăBuilt-in Pull Up Resistor for I/O Pin in Both Directions ăAll Pins are Fully ESD Protected, According to GSM Specification ăSupports 10 MHz Clock ă6.0 kV ESD Proof on SIM Card Pins ăThese are Pb-Free Devices** Typical Applications ăCellular Phone SIM Interface ăIdentification Module VDD C4 4.7 GND mF VCC P4 P3 P2 P1 P0 GND 1 VDD 2 14 SIM_VCC 13 STOP 3 MOD_VCC 4 PWR_ON 5 I/O Cta Ctb 12 6 11 CLOCK SIM_IO 7 RESET 10 GND 9 SIM_CLK 8 SIM_RST C2 220 nF 43 C3 1 mF GND 21 9 8 7 65 10 GND Figure 1. Typical Interface Application **For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ©Ă Semiconductor Components Industries, LLC, 2007 1 May, 2007 - Rev. 3 http://onsemi.com 1 TSSOP-14 DTB SUFFIX CASE 948G MARKING DIAGRAM 14 NCN 6010 ALYWG G 1 A = ...