MKP3V130

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MKP3V110/D Sidac High Voltage Bilateral Triggers . . . designed for direct interface with the ac power line. Upon reaching the breakover voltage in each direction, the device switches from a blocking state to a low voltage on-state. Conduction will continue like an SCR until the main terminal current drops below the holding current. The plastic axial lead package provides high pulse current capability at low cost. Glass passivation insures reliable operation. Applications are: High Pressure Sodium Vapor Lighting Strobes and Flashers Ignitors High Voltage Regulators Pulse Generators MKP3V110* MKP3V120* MKP3V130* *Motorola preferred devices SIDACs 1 AMPERE RMS 100 thru 135 VOLTS MT1 MT2 CASE 267-03 SURMETIC 50 PLASTIC AXIAL MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Repetitive Breakover Voltage MKP3V110 MKP3V120 MKP3V130 Off-State Repetitive Voltage On-State RMS Current On-State Surge Current (Non-repetitive) (60 Hz One Cycle Sine Wave, Peak Value) Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature (Lead Length ≥ 1/16″ from Case, 10 s Max) VDRM IT(RMS) ITSM TJ Tstg — Symbol V(BO) 100 110 120 — — — –40 –40 — 120 130 140 ± 90 1 20 +125 +150 +230 Volts Amp Amps °C °C °C Min Max Unit Volts THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Lead (Lead Length = 3/8″) Symbol RθJL Min — Max 15 Unit °C/W Preferred devices are Motorola r...