MKP1V120

MKP1V120 Series Sidac High Voltage Bidirectional Triggers Bidirectional devices designed for direct interface with the ac power line. Upon reaching the breakover voltage in each direction, the device switches from a blocking state to a low voltage on−state. Conduction will continue like a Triac until the main terminal current drops below the holding current. The plastic axial lead package provides high pulse current capability at low cost. Glass passivation insures reliable operation. Features High Pressure Sodium Vapor Lighting Strobes and Flashers Ignitors High Voltage Regulators Pulse Generators Used to Trigger Gates of SCR’s and Triacs Indicates UL Registered − File #E210057 These are Pb−Free Devices* MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Off−State Voltage (Sine Wave, 50 to 60 Hz, TJ = − 40 to 125°C) MKP1V120, MKP1V130, MKP1V160 MKP1V240 VDRM, VRRM "90 "180 V On-State Current RMS (TL = 80°C, IT(RMS) Lead Length = 3/8″, All Conduction Angles) "0.9 A Peak Non−repetitive Surge Current (60 Hz One Cycle Sine Wave, TJ = 125°C) Operating Junction Temperature Range Storage Temperature Range THERMAL CHARACTERISTICS ITSM "4.0 A TJ −40 to +125 °C Tstg −40 to +150 °C Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Lead Lead Length = 3/8″ RqJL 40 °C/W Lead Solder Temperature (Lead Length w 1/16″ from Case, 10 s Max) TL 260 °C Stresses exceeding Maximum Ratings may damage...