2.4GHz SiGe / High IP3 Low-Noise Amplifier
19-1786; Rev 1; 11/03
KIT ATION EVALU E L B A AVAIL
2.4GHz SiGe, High IP3 Low-Noise Amplifier
General Description Feat...
Description
19-1786; Rev 1; 11/03
KIT ATION EVALU E L B A AVAIL
2.4GHz SiGe, High IP3 Low-Noise Amplifier
General Description Features
o Low Noise Figure (2.0dB at 2450MHz) o High Gain: 16dB o Adjustable IP3 and Bias Current o Low-Power Standby Mode o On-Chip Output Matching o +2.7V to +5.5V Single-Supply Operation o Ultra-Small 6-Pin SC70 Package
MAX2644
The MAX2644 low-cost, high third-order intercept point (IP3) low-noise amplifier (LNA) is designed for applications in 2.4GHz WLAN, ISM, and Bluetooth radio systems. It features a programmable bias, allowing the input IP3 and supply current to be optimized for specific applications. The LNA provides up to +1dBm input IP3 while maintaining a low noise figure of 2.0dB and a typical gain of 16dB. The MAX2644 is designed on a low-noise, advanced silicon-germanium (SiGe) technology. It operates with a +2.7V to +5.5V single supply and is available in an ultra-small 6-pin SC70 package.
________________________Applications
Bluetooth 802.11 WLAN Home RF Satellite CD Radio 2.4GHz ISM Band Radios 2.4GHz Cordless Phones Wireless Local Loop (WLL)
MAX2644EXT-T PART
Ordering Information
TEMP RANGE -40°C to +85°C PINPACKAGE 6 SC70 TOP MARK AAG
Typical Operating Circuit
RBIAS 1.2kΩ VCC BIAS BIAS VCC
Pin Configuration
TOP VIEW
C1 33pF RF INPUT L1 3.3nH RFIN RFOUT RF OUTPUT
BIAS 1
6
RFOUT
GND 2
MAX2644
5
GND
RFIN 3
4
VCC
MAX2644
GND
SC70-6
________________________________________________________________ Maxim Integrated Products
1
...
Similar Datasheet