Dual-Phase / Quick-PWM Controller
19-2745; Rev 1; 9/03
KIT ATION EVALU E L B A AVAIL
Dual-Phase, Quick-PWM Controller for AMD Hammer CPU Core Power Supp...
Description
19-2745; Rev 1; 9/03
KIT ATION EVALU E L B A AVAIL
Dual-Phase, Quick-PWM Controller for AMD Hammer CPU Core Power Supplies
General Description Features
o Dual-Phase, Quick-PWM Controller o ±0.75% VOUT Accuracy Over Line, Load, and Temperature (1.3V) o Active Voltage Positioning with Adjustable Gain and Offset o 5-Bit On-Board DAC: 0.675V to 1.55V Output Adjust Range o Selectable 100kHz/200kHz/300kHz/550kHz Switching Frequency o 4V to 28V Battery Input Voltage Range o Adjustable Slew-Rate Control o Drives Large Synchronous Rectifier MOSFETs o Selectable Output Overvoltage Protection o Undervoltage and Thermal-Fault Protection o Power Sequencing and Timing o Selectable Suspend Voltage o Soft-Shutdown o Selectable Single- or Dual-Phase Pulse Skipping
MAX1544
40
39
38
37
36
35
34
33
32
31
The MAX1544 is a dual-phase, Quick-PWM™, stepdown controller for AMD Hammer™ CPU core supplies. Dual-phase operation reduces input ripple current requirements and output voltage ripple while easing component selection and layout difficulties. The QuickPWM control scheme provides instantaneous response to fast load-current steps. The MAX1544 includes active voltage positioning with adjustable gain and offset, reducing power dissipation and bulk output capacitance requirements. The MAX1544 is intended for two different notebook CPU core applications: stepping down the battery directly or stepping down the 5V system supply to create the core voltage. The single-stage conversion method...
Similar Datasheet