Slew-Rate-Limited RS-485 Transceivers
19-0367; Rev 1; 5/06
MAX1482/MAX1483
20µA, 1⁄8-Unit-Load, Slew-Rate-Limited RS-485 Transceivers
_______________Genera...
Description
19-0367; Rev 1; 5/06
MAX1482/MAX1483
20µA, 1⁄8-Unit-Load, Slew-Rate-Limited RS-485 Transceivers
_______________General Description
The MAX1482 and MAX1483 are low-power transceivers for RS-485 and RS-422 communication. Both feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables. Data rates are guaranteed up to 250kbps. The MAX1482/MAX1483 draw only 20µA of supply current. Additionally, they have a low-current shutdown mode that consumes only 0.1µA. Both parts operate from a single +5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. The MAX1482 is full duplex and the MAX1483 is half duplex. Both parts have a 1⁄8-unit-load input impedance that guarantees up to 256 transceivers on the bus.
________________________Applications
Low-Power RS-485/RS-422 Networks Transceivers for EMI-Sensitive Applications Industrial-Control Local Area Networks Large 256-Node LANs
_________Typical Operating Circuits
____________________________Features
♦ Low 20µA Operating Current
♦ Slew-Rate Limited for Reduced EMI and Reduced Reflections
♦ 0.1µA Low-Current Shutdown Mode
♦ Designed for RS-485 and RS-422 Applications
♦ Operate from a Single +5V Supply
♦ -7V to +12V Common-Mode Input Volt...
Similar Datasheet