825MHz to 915MHz / SiGe High-Linearity Active Mixer
19-2489; Rev 1; 9/02
825MHz to 915MHz, SiGe High-Linearity Active Mixer
General Description
The MAX9982 fully integrate...
Description
19-2489; Rev 1; 9/02
825MHz to 915MHz, SiGe High-Linearity Active Mixer
General Description
The MAX9982 fully integrated SiGe mixer is optimized to meet the demanding requirements of GSM850, GSM900, and CDMA850 base-station receivers. Each high-linearity device includes a local oscillator (LO) switch, LO driver, and active mixer. On-chip baluns are also integrated to allow for single-ended RF and LO inputs. Since the active mixer provides 2dB of conversion gain, the device effectively replaces the IF amplifier stage, which typically follows most passive mixer implementations. The MAX9982 provides exceptional linearity with an input IP3 of greater than +26dBm. The integrated LO driver allows for a wide range of LO drive levels from -5dBm to +5dBm. In addition, the built-in switch enables rapid LO selection of less than 250ns, as needed for GSM frequency-hopping applications. The MAX9982 is available in a 20-pin QFN package (5mm ✕ 5mm) with an exposed paddle and is specified over the -40°C to +85°C extended temperature range. o +26.8dBm Input IP3 o +13dBm Input 1dB Compression Point o 825MHz to 915MHz RF Frequency Range o 70MHz to 170MHz IF Frequency Range o 725MHz to 1085MHz LO Frequency Range o 2dB Conversion Gain o 12dB Noise Figure o -5dBm to +5dBm LO Drive o 5V Single-Supply Operation o Built-In LO Switch o ESD Protection o Internal RF and LO Baluns for Single-Ended Inputs
Features
MAX9982
Applications
GSM850/GSM900 2G and 2.5G EDGE Base Station Receivers Cellular cdma...
Similar Datasheet