MAX5363

19-1719; Rev 0; 4/00 Low-Cost, Low-Power, 6-Bit DACs with 3-Wire Serial Interface in SOT23 General Description The MAX5363/MAX5364/MAX5365 low-cost, 6-bit digitalto-analog converters (DACs) in miniature 6-pin SOT23 packages have a simple 3-wire, SPI  /QSPI  / MICROWIRE-compatible serial interface that operates up to 10MHz. The MAX5363 has an internal +2V reference and operates from a +2.7V to +3.6V supply. The MAX5364 has an internal +4V reference and operates from a +4.5V to +5.5V supply. The MAX5365 operates over the full +2.7 to +5.5V supply range and has an internal reference equal to 0.9 ✕ VDD. The MAX5363/MAX5364/MAX5365 require an extremely low supply current of only 150µA (typ) and provide a buffered voltage output. These devices power up at zero code and remain there until a new code is written to the DAC registers. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5363/MAX5364/ MAX5365 include a 1µA, low-power shutdown mode that features software-selectable output loads of 1kΩ, 100kΩ, or 1MΩ to ground. Features o 6-Bit Resolution in a Miniature 6-Pin SOT23 Package o Wide +2.7V to +5.5V Supply Range (MAX5365) o <1µA Shutdown Mode o Software-Selectable Output Resistance During Shutdown o Buffered Output Drives Resistive Loads o Low-Glitch Power-On Reset to Zero DAC Output o 3-Wire SPI/QSPI/MICROWIRE-Compatible Interface o <±5% Full-Scale Error (MAX5365) o <±1LSB max INL/DNL o Low 230µA ...