Central Office Interface Circuit Preliminary Information
®
MH88632
Central Office Interface Circuit Preliminary Information
Features
• • • • • • • • • • Loop start and ground ...
Description
®
MH88632
Central Office Interface Circuit Preliminary Information
Features
Loop start and ground start capabilities Transformerless 2-4 wire conversion Programmable transmit/receive gain with 0dB defaults Programmable input impedance with 600 Ω and 900Ω defaults Programmable network balance with 600 Ω, 900Ω, and AT&T compromise default One loop start & two ground start relay drivers Line state detection outputs Forward loop, reverse loop, ring ground, tip ground, ringing voltage +5V operation On-hook audio reception (to accommodate ANI)
ISSUE 5
April 1995
Ordering Information MH88632 40 Pin SIL Package 0° C to 70° C
Description
The Mitel MH88632 Central Office Trunk Interface circuit provides a complete audio and signalling link between audio switching equipment and a central office. The functions provided by the MH88632 include 2-4 Wire Hybrid conversion, programmable transmit and receive gains, programmable line impedance and programmable network balance. The device is fabricated using thick film hybrid technology which incorporates various technologies for optimum circuit design and very high reliability.
Applications Interface to Central Office for:
PBX Key Telephone System Channel bank Voice Mail Terminal Equipment Digital Loop Carrier
RING TIP
VDD
VEE
AGND
RV FL RL RG TG
Status Detection XLA XLB XLC XLD LRC LRD BRC BRD GRC GRD Loop Termination Receive Gain 2-4 Wire Hybrid Transmit Gain RX GRX1 GRX0 TX GTX1 GTX0
Loop Relay D...
Similar Datasheet