MAP140

MAP140 SERIES Power-One’s MAP140 series provides a full range of options and up to 30 watts more power than comparable products in this industry standard footprint. With a universal input from 85 to 264 VAC and power densities up to 2.6 watts/inch3, the MAP140 meets the most rigorous requirements of commercial, industrial, and datacom systems. FEATURES Universal Input 85-264 VAC Input Transient & ESD Compliance to EN61000-4-2/-3/-4 CE Marked to Low Voltage Directive Industry Standard Footprint: 7.00" x 4.30" x 1.80" (177.8mm x 109.2mm x 45.7mm) Remote Sense and Overvoltage Protection Power Fail Signal Standard on MAP140-3000P, Optional on MAP140-1012 and MAP140-1024 Optional Overtemperature Protection, L-Bracket, and Cover. SINGLE OUTPUT MODEL SELECTION CHART MODEL OUTPUT VOLTAGE ADJUSTMENT RANGE CONVECTION COOLED CURRENT FORCED AIR CURRENT (NOTE 3) LINE REGULATION LOAD REGULATION RIPPLE & NOISE %p-p (NOTE 1) INITIAL SETTING ACCURACY Rated for use in convection and forced air cooled (200 LFM) applications, the MAP140 delivers dependable power with a Mean Time Before Failure (MTBF) in excess of 180,000 hours. In addition to UL, CSA, and TÜV regulatory compliance, the MAP140 displays the CE Mark. MAP140-1012 MAP140-1024 MAP140-1048 12V/15V 24V/28V 48V 11.0V to 16.0V 22.8V to 29.2V 45.6V to 54.0V 9.2/7.3A (Note 2) 4.6/4A (Note 2) 2.3A 12.5A/10A (Note 2) 6.3A/5.4A (Note 2) 3.1A 0.1% 0.1% 0.1% 0.5% 0.5% 0.5% 1% 1% 1% 11.97V to 12.03V 23.95V to 24.05V 47.9V ...