MAC210-6FP

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MAC210FP/D Triacs MAC210FP Series MAC210AFP Series ISOLATED TRIACs THYRISTORS 10 AMPERES RMS 200 thru 800 VOLTS Silicon Bidirectional Thyristors . . . designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering. Blocking Voltage to 800 Volts All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability Gate Triggering Guaranteed in Three Modes (MAC210FP Series) or Four Modes (MAC210AFP Series) MT2 G MT1 CASE 221C-02 STYLE 3 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Repetitive Peak Off-State Voltage(1) (TJ = –40 to +125°C) 1/2 Sine Wave 50 to 60 Hz, Gate Open MAC210-4FP, MAC210A4FP MAC210-6FP, MAC210A6FP MAC210-8FP, MAC210A8FP MAC210-10FP, MAC210A10FP On-State RMS Current (TC = +70°C) Full Cycle Sine Wave 50 to 60 Hz(2) Peak Nonrepetitive Surge Current (One Full Cycle, 60 Hz, TC = +70°C) preceded and followed by rated current Circuit Fusing (t = 8.3 ms) Peak Gate Power (TC = +70°C, Pulse Width = 10 µs) Average Gate Power (TC = +70°C, t = 8.3 ms) Peak Gate ...