MC12147

Order this document by MC12147/D Low Power Voltage Controlled Oscillator Buffer The MC12147 is intended for applications requiring high frequency signal generation up to 1300 MHz. An external tank circuit is used to determine the desired frequency of operation. The VCO is realized using an emitter–coupled pair topology. The MC12147 can be used with an integrated PLL IC such as the MC12202 1.1 GHz Frequency Synthesizer to realize a complete PLL sub–system. The device is specified to operate over a voltage supply range of 2.7 to 5.5 V. It has a typical current consumption of 13 mA at 3.0 V which makes it attractive for battery operated handheld systems. NOTE: The MC12147 is NOT suitable as a crystal oscillator. MC12147 LOW POWER VOLTAGE CONTROLLED OSCILLATOR BUFFER SEMICONDUCTOR TECHNICAL DATA Operates Up to 1.3 GHz Space–Efficient 8–Pin SOIC or SSOP Package Low Power 13 mA Typical @ 3.0 V Operation Supply Voltage of 2.7 to 5.5 V Typical 900MHz Performance – Phase Noise –105 dBc/Hz @ 100 kHz Offset – Tuning Voltage Sensitivity of 20 MHz/V Output Amplitude Adjustment Capability Two High Drive Outputs With a Typical Range from –8.0 to –2.0 dBm 8 1 D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) The device has two high frequency outputs which make it attractive for transceiver applications which require both a transmit and receive local oscillator (LO) signal. The outputs Q and QB are available for servicing the receiver IF and transmitter up–converter single–ended. I...