MC12017

Order this document by MC12015/D Dual Modulus Prescaler The MC12015, MC12016 and MC12017 are dual modulus prescalers which will drive divide by 32 and 33, 40 and 41, and 64 and 65, respectively. An internal regulator is provided to allow these devices to be used over a wide range of power–supply voltages. The devices may be operated by applying a supply voltage of 5.0 Vdc ±10% at Pin 7, or by applying an unregulated voltage source from 5.5Vdc to 9.5 Vdc to Pin 8. MC12015 MC12016 MC12017 MECL PLL COMPONENTS DUAL MODULUS PRESCALER SEMICONDUCTOR TECHNICAL DATA 225 MHz Toggle Frequency Low–Power 7.5 mA Maximum at 6.8 V Control Input and Output Are Compatible With Standard CMOS Connecting Pins 2 and 3 Allows Driving One TTL Load Supply Voltage 4.5 V to 9.5 V 8 1 P SUFFIX PLASTIC PACKAGE CASE 626 SIMPLIFIED BLOCK DIAGRAM Control Input TO Vreg 8 1 1 Signal Input Signal GND 0.001µF 5 6 0.001µF Vreg 7 0.1µF ÷N / N+1 2 Active Pullup 3 Output D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) 4 GND Device Voltage Regulator ORDERING INFORMATION Operating Temperature Range Package VCC 8 0.1µF MC12015D MC12016D MC12017D TA = –40° to +85°C Plastic SO–8 1. Vreg at Pin 7 is not guaranteed to be between 4.5 and 5.5V when VCC is being applied to Pin 8 2. Pin 7 is not to be used as a source of regulated output voltage MC12015P MC12016P MC12017P © Motorola, Inc. 1997 Rev 2 MC12015 MC12016 MC12017 MAXIMUM RATINGS [tblhead] Rating Regulated Voltage, Pin 7 Power Supply Voltage, ...