PECL* to TTL Translator
MC10H350
PECL* to TTL Translator
(+5 Vdc Power Supply Only)
Description The MC10H350 is a member of the 10H family of h...
Description
MC10H350
PECL* to TTL Translator
(+5 Vdc Power Supply Only)
Description The MC10H350 is a member of the 10H family of high performance
ECL logic. It consists of 4 translators with differential inputs and TTL outputs. The 3-state outputs can be disabled by applying a HIGH TTL logic level on the common OE input.
The MC10H350 is designed to be used primarily in systems incorporating both ECL and TTL logic operating off a common power supply. The separate VCC power pins are not connected internally and thus isolate the noisy TTL VCC runs from the relatively quiet ECL VCC runs on the printed circuit board. The differential inputs allow the MC10H350 to be used as an inverting or noninverting translator, or a differential line receiver. The MC10H350 can also drive CMOS with the addition of a pullup resistor.
Features
Propagation Delay, 3.5 ns Typical MECL 10K™ Compatible These Devices are Pb-Free, Halogen Free and are RoHS Compliant
www.onsemi.com
16
1
PDIP−16 P SUFFIX CASE...
Similar Datasheet