-3.3V / -5V Triple ECL Input to LVPECL/PECL Output Translator
MC10EP90, MC100EP90
-3.3V / -5V Triple ECL Input to LVPECL/PECL Output Translator
Description The MC10/100EP90 is a TRI...
Description
MC10EP90, MC100EP90
-3.3V / -5V Triple ECL Input to LVPECL/PECL Output Translator
Description The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL
translator. The device receives differential LVECL or ECL signals and translates them to differential LVPECL or PECL output signals.
A VBB output is provided for interfacing with Single−Ended LVECL or ECL signals at the input. If a Single−Ended input is to be used the VBB output should be connected to the D input. The active signal would then drive the D input. When used the VBB output should be bypassed to ground by a 0.01 mF capacitor. The VBB output is designed to act as the switching reference for the EP90 under Single−Ended input switching conditions, as a result this pin can only source/sink up to 0.5 mA of current.
To accomplish the level translation the EP90 requires three power rails. The VCC supply should be connected to the positive supply, and the VEE connected to the negative supply.
The 100 Series contains temperature compe...
Similar Datasheet