3.3 V / 5 V ECL B2 Divider
The MC10/100EP32 is an integrated B2 divider with differential
The VBB pin, an internally generated voltage supply, is available to
this device only. For single-ended input conditions, the unused
differential input is connected to VBB as a switching reference voltage.
VBB may also rebias AC coupled inputs. When used, decouple VBB
and VCC via a 0.01ĂmF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, VBB should be left open.
The reset pin is asynchronous and is asserted on the rising edge.
Upon power-up, the internal flip-flops will attain a random state; the
reset allows for the synchronization of multiple EP32’s in a system.
The 100 Series contains temperature compensation.
• 350 ps Typical Propagation Delay
• Maximum Frequency > 4 GHz Typical (Figure 3)
• PECL Mode Operating Range:
♦ VCC = 3.0 V to 5.5 V with VEE = 0 V
• NECL Mode Operating Range:
♦ VCC = 0 V with VEE = −3.0 V to −5.5 V
• Open Input Default State
• Safety Clamp on Inputs
• Q Output Will Default LOW with Inputs Open or at VEE
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant
H = MC10
A = Assembly Location
K = MC100
L = Wafer Lot
5P = MC10
Y = Year
3K = MC100
W = Work Week
M = Date Code G = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
See detailed ordering and shipping information on page 8 of
this data sheet.
© Semiconductor Components Industries, LLC, 2016
July, 2016 − Rev. 12
Publication Order Number: