5.0 V ECL 1:2 Differential
The MC10EL/100EL11 is a differential 1:2 fanout buffer. The device
is functionally similar to the E111 device but with higher performance
capabilities. The within-device skew and propagation delay is
significantly improved over the E111.
The differential inputs of the EL11 employ clamping circuitry to
maintain stability under open input conditions. If the inputs are left open
(pulled to VEE) the Q outputs will go LOW.
The 100 Series contains temperature compensation.
• 265 ps Propagation Delay
• 5 ps Skew Between Outputs
• PECL Mode Operating Range: VCC = 4.2 V to 5.7 with VEE = 0 V
• NECL Mode Operating Range: VCC = 0 V with VEE = −4.2 V to −5.7 V
• Internal Input Pulldown Resistors
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant
Figure 1. Logic Diagram and Pinout Assignment
Table 1. PIN DESCRIPTION
Q0, Q0; Q1, Q1
ECL Data Inputs
ECL Data Outputs
H = MC10
K = MC100
4Q = MC10
2E = MC100
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
M = Date Code
G = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2016
July, 2016− Rev. 11
Publication Order Number: