MBRB2515L

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MBRB2515L/D ™ Data Sheet SWITCHMODE™ Power Designer's Rectifier MBRB2515L Motorola Preferred Device OR'ing Function Diode D2PAK Surface Mount Power Package The D2PAK Power Rectifier employs the Schottky Barrier principle in a large metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes. These state–of–the–art devices have the following features: Guardring for Stress Protection Low Forward Voltage 100°C Operating Junction Temperature Epoxy Meets UL94, VO at 1/8″ Guaranteed Reverse Avalanche Short Heat Sink Tab Manufactured — Not Sheared! Similar in Size to the Industry Standard TO–220 Package Mechanical Characteristics Case: Epoxy, Molded Weight: 1.7 grams (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped 50 units per plastic tube Available in 24 mm Tape and Reel, 800 units per 13″ reel by adding a “T4” suffix to the part number Marking: B2515L MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) TC = 90°C Peak Repetitive For...