Power Brushless Motor Driver IC
Ordering number : ENN5687B
Monolithic Digital IC
LB1924
Power Brushless Motor Driver IC for Office Automation Equipmen...
Description
Ordering number : ENN5687B
Monolithic Digital IC
LB1924
Power Brushless Motor Driver IC for Office Automation Equipment
Overview
The LB1924 is a direct PWM drive output driver IC appropriate for the power brushless motors used in office automation equipment. It includes a speed control circuit, an FG amplifier, and other peripheral circuits and allows a drive circuit to be implemented with a single IC. It allows the number of external components to be reduced by including a lock protection circuit, a kickback absorption diode for the lower output side, and other components on chip.
Package Dimension
unit: mm 3147B-DIP28H
[LB1924]
28 15
R1.7
12.7 11.2
8.4
Functions
Breakdown voltage: 30 V, output current: 3.1 A Direct PWM drive output Speed discriminator + PLL speed control technique Crystal oscillator circuit Built-in FG and integrating amplifiers Forward/reverse switching circuit Speed lock detection output On-chip lower output side kickback absorption diode Full complement of built-in protection circuits, including lock protection, current limiter, and thermal protection circuits
1
20.0 27.0
14
1.93
1.78
0.6
1.0
4.0
4.0
SANYO: DIP28H
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious phy...
Similar Datasheet