Document
0.25
Ordering number:ENN1570B
Monolithic Digital IC
LB1265, 1265M
8-Channel Low-Saturation Driver
Overview
The LB1265, 1265M are 8-channel low saturation driver arrays having a strobe pin.
Applications
• Drive of various relays. • Drive of display elements such as LED, lamp. • Interface. • Drive of small-sized printers.
Features
• Low saturation output (0.3V max. at 80mA). • With a strobe pin. • On-chip spark killer diodes. • DIP20 package for high power use ; MFP20 package for
small-sized use.
Package Dimensions
unit:mm 3021C-DIP20
[LB1265]
24.0 20 11
1 1.0
10
7.62 6.4
3.3 3.9max
0.51min (3.25)
(0.57)
2.54 0.5
1.2
unit:mm 3036C-MFP20
[LB1265M]
SANYO : DIP20
20 11
0.1 (1.5) 1.7max 5.4 0.63 7.6
1 10 12.5 0.15
0.35 1.27 (0.4)
SANYO : MFP20
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22801TN (KT)/O3095YK/8187KI/9144KI, TS No.1570–1/3
LB1265, 1265M
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Maximum supply voltage
Output supply voltage Input supply voltage Strobe input supply voltage Output current Spark killer diode forward current
Symbol
VCC1 VCC2 VOUT
VIN VI(ST) IOUT IF(S)
Allowable power dissipation
Pd max
Operating temperature Storage temperature
Topr Tstg
Conditions
Pulse width≤35ms, duty=5% LB1265 : DIP20 LB1265M : MFP20
Allowable Operating Ranges at Ta = 25˚C
Parameter Supply voltage Input H-level voltage Input L-level voltage
Symbol
VCC1 VIH VIL
Conditions
Electrical Characteristics at Ta = 25˚C
Parameter
Output voltage
Input current Strobe input current
Output leakage current
Spark killer diode forward voltage Spark killer diode reverse current Turn-ON time (LB1265 only) Turn-OFF time (LB1265 only)
Symbol
Conditions
VOUT1 VOUT2
IIN II(ST) Io(leak)1 Io(leak)2 VF(S) IR(S)
ton toff
VCC1=VCC2=6.0V, VIN=4.0V, IOUT=80mA VCC1=VCC2=4.0V, VIN=2.0V, IOUT=40mA VCC1=VCC2=VIN=7.0V VCC1=VCC2=0V, VI(ST)=7.0V VCC1=VCC2=VOUT=7.0V, VIN=0V VCC1=VCC2=VOUT=VIN=7.0V, VI(ST)=4.0V IF(S)=100mA VCC2=7.0V, VOUT=0V
VCC1=5.0V, VIN=5.0V, VOUT=25V, RL=250Ω, f pulse=1kHz, duty=50%
Ratings 7.0 25 28 7.0 7.0 100 100
1130 300
–20 to +75 –40 to +125
Unit V V V V V mA mA
mW mW ˚C ˚C
Ratings 3.0 to 7.0 2.0 to 7.0
–0.3 to +0.3
Unit V V V
Ratings min typ max
Unit
0.3 V
0.25 V
0.5 mA
0.5 mA
30 µA
30 µA
3.0 V
30 µA
0.3 µs
5.0 µs
Equivalent Circuit
No.1570–2/3
LB1265, 1265M
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information describe.