LA4625

Ordering number : ENN6631 Monolithic Linear IC LA4625 Two-Channel 13.5 W BTL Audio Power Amplifier Overview The LA4625 is a 2-channel general-purpose BTL audio power amplifier provided in a miniature package. It was designed for the best possible audio quality and features an extended low band roll-off frequency provided by a newly-developed NF circuit that does not require an external capacitor. Furthermore, crosstalk, which can cause muddiness in the audio output, has been significantly reduced by both circuit and wiring pattern improvements. Thus this amplifier can provide powerful lows and clear highs. Note that this device is pin compatible with the 20 W × 2channel LA4628, and allows end products differentiated by their power rating to share the same printed circuit board. Package Dimensions unit: mm 3113A-SIP14HZ [LA4625] 27.0 20.0 11.8 R1.7 14.5max 4.0 7.8 8.4 1 1.94 3.56 0.5 14 5.2 4.6 0.4 1.6 2.2 Features Total output: 13.5 W + 13.5 W (at VCC = 12 V, RL = 4 Ω, THD = 10%) PMPO reference data: 115 W × 2 (VCC = 20 V, RL = 4 Ω) High-fidelity design (fL < 10 Hz, fH = 130 kHz) Extremely low impulse noise levels An arbitrary amplifier startup time can be set up with external components. Full complement of built-in protection circuits (includes circuits that protect against shorting to VCC, shorting to ground, load shorting, overvoltages and excessive temperatures) 1.78 3.56 SANYO: SIP14HZ Any and all SANYO products described or contained herein do ...