KA8601C
INTRODUCTION
SPEAKER PHONE WITH SPEECH NETWORK
The KA8601C is a monolithic integrated circuit for use in high ...
KA8601C
INTRODUCTION
SPEAKER PHONE WITH SPEECH NETWORK
The KA8601C is a monolithic integrated circuit for use in high performance speaker phone system. The KA860lC consists of speaker phone and speech network. Speaker phone includes attenuators, amplifiers, level detectors, attenuator control, hybrid amplifiers,
regulator and AGC circuit. Speech network includes transmit amp, receive amp, voltage
regulator for dialer, side tone control, and line equalizer.
48-SDIP-600
FEATURES
Speaker Phone - Low Operating Voltage (3.0 ~ 6.5V) - High Attenuator Gain Range (52dB) - Improved Sensitivity (Four-point Signal Sensing) - Chip Disable for Active or Standby Operation - Microphone Amp Gain set by External Components Speech Network - Low Operating Voltage (1.5V : speech) - Regulated Voltage for Dialer (Typically 3.3V) - Transmit, Receive, Side Tone Gains set by External Components - Mute Input for DTMF Dialing
ORDERING INFORMATION
Device KA8601C Package 48-SDIP-600 Operating Temperature - 25°C ~ + 75°C
BLOCK DIAGRAM
DETO RX1
DETO RX2
DETO TX1
DETO TX2
DETI RX1
DETI RX2
DETI TX1
DETI TX2
RXO ATT
DTO-
TXO ATT 26
RXI ATT
TXI ATT
PD RX
PD TX
MICO
GND
MICI
47 DTI
36
46
45
44
43
42
41
40
39
38
37
35
34
33
32
31
30
29
28
27
48
25 VCC 24 POWER BNM : Back Noise Monitor 3.3Vreg
level detector
mic amp
level detector
RX Attenuator
SPEAKER PHONE PART
hybrid amp 1
ATTENUATOR CONTROLLER
hybrid amp 2
sidetone amp
TX amp2
BNM
FILTER
SPEECH ...