Document
www.fairchildsemi.com
KA1H0165RN/KA1H0165R
Fairchild Power Switch(FPS)
Features
• • • • • • • • Precision Fixed Operating Frequency (100kHz) Pulse by Pulse Over Current Limiting Over Load Protection Over Voltage Protection (Min. 23V) Internal Thermal Shutdown Function Under Voltage Lockout Internal High Voltage Sense FET Auto Restart Mode
Description
The Fairchild Power Switch(FPS) product family is specially designed for an off line SMPS with minimal external components. The Fairchild Power Switch(FPS) consist of high voltage power SenseFET and current mode PWM controller IC. PWM controller features integrated fixed oscillator, under voltage lock out, leading edge blanking, optimized gate turn-on/turn-off driver, thermal shut down protection, over voltage protection, temperature compensated precision current sources for loop compensation and fault protection circuit compared to discrete MOSFET and controller or RCC switching converter solution The Fairchild Power Switch(FPS) can reduce total component count, design size, weight and at the same time increase & efficiency, productivity, and system reliability. It has a basic platform well suited for cost effective design in either a flyback converter or a forward converter.
8-DIP TO-220F-4L
1
1.6.7.8. Drain 2. GND 3. VCC 4. F/B 5. S/S
1
1. GND 2. Drain 3. VCC 4. F/B
Internal Block Diagram
VCC 32V 5V Vref Good logic Internal bias DRAIN SFET
* Soft Start
5V
OSC S R Q − 1mA 2.5R 1R 9V + 7.5V − + 25V − Thermal S/D OVER VOLTAGE S/D +
FB
5µA
L.E.B 0.1V S R Q GND
Power on reset
* KA1H0165RN
Rev.1.0.3
©2003 Fairchild Semiconductor Corporation
KA1H0165RN/KA1H0165R
Absolute Maximum Ratings
Parameter Maximum Drain Voltage
(1)
Symbol VD,MAX VDGR VGS IDM EAS ID ID VCC,MAX VFB PD Darting TA TSTG
Value 650 650 ±30 4.0 95 1.0 0.7 30 -0.3 to VSD 40 0.32 -25 to +85 -55 to +150
Unit V V V ADC mJ ADC ADC V V W W/°C °C °C
Drain-Gate Voltage (RGS=1MΩ) Gate-Source (GND) Voltage Drain Current Pulsed (2) Single Pulsed Avalanche Energy (3) Continuous Drain Current (TC=25°C) Continuous Drain Current (TC=100°C) Maximum Supply Voltage Input Voltage Range Total Power Dissipation Operating Ambient Temperature Storage Temperature
Notes: 1. Tj = 25°C to 150°C 2. Repetitive rating: Pulse width limited by maximum junction temperature 3. L = 80mH, VDD = 50V, RG = 27Ω, starting Tj = 25°C
2
KA1H0165RN/KA1H0165R
Electrical Characteristics (SFET Part)
(Ta=25°C unless otherwise specified) Parameter Drain-Source Breakdown Voltage Symbol BVDSS Condition VGS=0V, ID=50µA VDS=Max., Rating, VGS=0V VDS=0.8Max., Rating, VGS=0V, TC=125°C VGS=10V, ID=0.5A VDS=50V, ID=0.5A VGS=0V, VDS=25V, f=1MHz VDD=0.5B VDSS, ID=1.0A (MOSFET switching time is essentially independent of operating temperature) VGS=10V, ID=1.0A, VDS=0.5B VDSS (MOSFET switching time is essentially independent of operating temperature) Min. 650 0.5 Typ. Max. Unit 8 250 25 10 12 4 30 10 3 9 50 200 10 21 nC nS pF V µA µA
Ω
Zero Gate Voltage Drain Current Static Drain-Source on Resistance (Note) Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn on Delay Time Rise Time Turn off Delay Time Fall Time Total Gate Charge (Gate-Source+Gate-Drain) Gate-Source Charge Gate-Drain (Miller) Charge
Note: 1. Pulse test: Pulse width ≤ 300µS, duty cycle ≤ 2% 1 2. S = --R
(Note)
IDSS
RDS(ON) gfs Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd
S
3
KA1H0165RN/KA1H0165R
Electrical Characteristics (Control Part) (Continued)
(Ta=25°C unless otherwise specified) Parameter UVLO SECTION Start Threshold Voltage Stop Threshold Voltage OSCILLATOR SECTION Initial Accuracy Frequency Change With Temperature Maximum Duty Cycle FEEDBACK SECTION Feedback Source Current Shutdown Feedback Voltage Shutdown Delay Current SOFT START SECTION (KA1H0165RN) Soft Start Voltage Soft Start Current REFERENCE SECTION Output Voltage (1) Temperature Stability Peak Current Limit PROTECTION SECTION Thermal Shutdown Temperature (1) Over Voltage Protection Voltage TOTAL DEVICE SECTION Start-Up Current Operating Supply Current (Control Part Only) VCC Zener Voltage ISTART IOP VZ VCC=14V Ta=25°C ICC=20mA 0.1 6 30 0.3 12 32.5 0.4 18 35 mA mA V TSD VOVP 140 23 160 25 28 °C V
(1)(2) (2)
Symbol VSTART VSTOP FOSC ∆F/∆T Dmax IFB VSD Idelay VSS ISS Vref Vref/∆T IOVER
Condition After turn on Ta=25°C -25°C ≤ Ta ≤ +85°C Ta=25°C, 0V ≤ Vfb ≤ 3V Ta=25°C, 5V ≤ Vfb ≤ VSD VFB=2V Sync & S/S=GND Ta=25°C -25°C ≤ Ta ≤ +85°C Max. inductor current
Min. 14 9 90 64 0.7 6.9 4.0 4.7 0.8 4.80 0.53
Typ. 15 10 100 ±5 67 0.9 7.5 5.0 5.0 1.0 5.00 0.3 0.6
Max. 16 11 110 ±10 70 1.1 8.1 6.0 5.3 1.2 5.20 0.6 0.67
Unit V V kHz % % mA V µA V mA V mV/°C A
CURRENT LIMIT(SELF-PROTECTION)SECTION
Note: 1. These parameters, although guaranteed, are not 100% tested in production 2. These parameters, although guaranteed, are tested in EDS (wafer test) process
4
KA1H0165RN/KA1H0165R
Typical Performance Characteristics
(These characteristic graphs are normalized at.