SYNC SIGNAL PROCESSOR
MITSUBISHI ICs (Monitor)
M52347SP/FP
SYNC SIGNAL PROCESSOR DESCRIPTION
The M52347 automatically selects three types of ...
Description
MITSUBISHI ICs (Monitor)
M52347SP/FP
SYNC SIGNAL PROCESSOR DESCRIPTION
The M52347 automatically selects three types of synchronous signals containing separate sync (positive and negative polarities of 0.5 to 2.5 VP-P), composite sync (positive and negative polarities of 0.5 to 2.5 VP-P) and sync-on-video (sync negative polarity), and performs waveform shaping. The IC is optimum to synchronous signal processing for multi-scan type display monitor.
H. STATE 1 V. STATE 2 CLAMP SW 3 20 CLAMP TIMING 19 Y. POL. 18 H. POL.
PIN CONFIGURATION (TOP VIEW)
M52347SP/FP
FEATURES
GREEN IN 4 GND 5 COMP/H IN 6 COMP/H DET 7 V IN 8 V DET 9 V TIME GATE SW 10
17 CLAMP+ OUT 16 VCC 15 HD- OUT 14 HD+ OUT 13 VD+ OUT 12 V S/S OUT 11 V S/S IN
Low power consumption with supply voltage of 5V Capable of obtaining output information on whether to input synchronous signal, and on polarity Output of clamp pulse Equipped with V TIME GATE SW that enables selecting whether or not VD portion pulse is output from pin 14 / 15 . Equipped with CLAMP SW that enables switching the clamp pulse output position.
APPLICATION
Display monitor
Outline 20P4B(SP) 20P2N-A(FP)
RECOMMENDED OPERATING CONDITION
Supply voltage range..............................................Vcc=4.5 to 5.5V Rated Supply voltage............................................................Vcc=5V
BLOCK DIAGRAM
CLAMP TIMING 20
Y. POL. 19
H. POL. 18
CLAMP+ OUT 17
VCC 16
HDOUT 15
HD+ OUT 14
VD+ OUT 13
V S/S OUT 12
V S/S IN...
Similar Datasheet