1 W BTL mono audio amplifier
INTEGRATED CIRCUITS
DATA SHEET
TDA7052A/AT 1 W BTL mono audio amplifier with DC volume control
Product specification S...
Description
INTEGRATED CIRCUITS
DATA SHEET
TDA7052A/AT 1 W BTL mono audio amplifier with DC volume control
Product specification Supersedes data of August 1991
July 1994
NXP Semiconductors
1 W BTL mono audio amplifier with DC volume control
Product specification
TDA7052A/AT
FEATURES
DC volume control Few external components Mute mode Thermal protection Short-circuit proof No switch-on and off clicks Good overall stability Low power consumption Low HF radiation ESD protected on all pins
GENERAL DESCRIPTION
The TDA7052A/AT are mono BTL output amplifiers with DC volume control. They are designed for use in TV and monitors, but also suitable for battery-fed portable recorders and radios.
Missing Current Limiter (MCL)
A MCL protection circuit is built-in. The MCL circuit is activated when the difference in current between the output terminal of each amplifier exceeds 100 mA (typical 300 mA). This level of 100 mA allows for headphone applications (single-ended).
QUICK REFERENCE DATA
SYMBOL VP PO
Gv φ IP THD
PARAMETERS
positive supply voltage range output power
TDA7052A TDA7052AT maximum total voltage gain gain control range total quiescent current total harmonic distortion TDA7052A TDA7052AT
CONDITIONS
RL = 8 Ω; VP = 6 V RL = 16 Ω; VP = 6 V
VP = 6 V; RL = ∞ PO = 0.5 W PO = 0.25 W
MIN. TYP. MAX. UNIT
4.5 −
18 V
1.0 1.1 −
W
0.5 0.55 −
W
34.5 35.5 36.5 dB
75 80 −
dB
− 7 12 mA
− 0.3 1 % − 0.3 1 %
ORDERING INFORMATION
EXTENDED TYPE NUMBER
TDA7052A TDA705...
Similar Datasheet